3-Phase PLC Based Electrical Control Panel

Brand: PValley

Model: PLC-85CP9

Country of Origin: China

Assemble/ Manufacturer: Bangladesh

 

 

General Feature:

Body Material:

Printed Front Side Sheet

Sheet Type: Digital
Country of origin: China
Feature:

• Sheet number 26
• Storage Printed temperature 300°c
• Color White/Silver

Safety Breaker:
Brand: Hyundai
Country of origin: South Korea
Feature:

• Human Body Sense safety
• Current error detection range is 20mA
• Soft tripping
• Low noise cut off

Control Switch:

• Mounting:Standard 22mm diameter hole, compatible with industrial control panels.
• Actuation:
  • Momentary:Returns to its original state after release (e.g., Start/Stop).
  • Latching (Maintained):Stays in the pressed position until pressed again (e.g., ON/OFF).
• Illumination:Available with integrated LED lights (ring or power symbol) in multiple colors (red, green, blue, yellow) for visual feedback.
• Durability:High IP ratings (IP65, IP67, IP68) for dust and water protection, plus wide operating temperature ranges.
• Contacts:Often modular, allowing stackable Normally Open (NO) and Normally Closed (NC) contact blocks (e.g., 1NO 1NC, DPST).
• Materials:Available in plastic (XB5) or metal (XB4) bezels for different environments.
• Functionality:Can be combined into double or multi-button units, key switches, or emergency stops (E-stops).

 

Technical Specification:

1. System Type: Programmable Logic Controller (PLC) based 3 Phase Electrical Control Panel
2. Input Supply: Voltage: 220VAC/415VAC, 1/3 Phase, 50 Hz , Incoming protection: MCCB / MCB with suitable rating
3. PLC Specification:

• Type: Industrial-grade Programmable Logic Controller
• I/O Configuration: Digital & Analog Inputs/Outputs as per system requirement
• Communication Ports: RS-485 / Ethernet / Modbus RTU / TCP
• Programming: Ladder Logic / Function Block Diagram

4. Control Features:

• Automatic and manual operation modes
• Real-time monitoring and control of electrical loads
• Overload, short-circuit, and phase-failure protection
• Status indication through LEDs or HMI

5. HMI (Human Mach Interface):

Touchscreen Display (4”-10” as required) Parameter setting, alarm display, and data visualization

6. Protection & Safety:

• Overcurrent, short circuit, and earth fault protection
• Phase sequence and phase failure protection
• Input Overvoltage,
• Input Under voltage,
• Drive overload fault,
• Ground Fault,
• Emergency stop button provided

7. Enclosure:

• Material: CRCA Sheet Steel
• Protection: IP54 / IP55 for indoor use (higher for outdoor)
• Finish: Powder coated, corrosion resistant

8. Wiring & Components:

• Internal wiring with PVC insulated copper cables
• Terminal blocks: Heavy-duty, labeled Contactors, relays,
• timers: Industrial grade

9. Indicators & Meters:

Voltmeters and ammeters for all three phases Indication lamps for ON/OFF/Trip status

10. Cooling & Ventilation: Natural air ventilation or cooling fan as required
11. Standards: Conforms to IEC / IS standards for control panels and electrical safety”

Accessories:

• Power Cord: 01 set
• Connecting Wire & Cable
• Complete 5 days of Training Included
• User Manual or User Guide

Warranty: Minimum 1 (One) Year