8051 Microcontroller MCU Learning Development Board Kit

Brand: PValley
Model: 8051 Microcontroller MCU Board

Part Number: HJ-C52

Country of Origin: China
Assemble/ Manufacturing: Bangladesh

Technical Specification:

• Enhanced 80C51 Central Processing Unit ,6T or 12T per machine cycle;
• Operation voltage range: 5.5V~3.3V (STC89C series) or 2.0V~ 3.6V (STC89LE series);
• Operation frequency range: 0- 48MHz@12T, or 0-24MHz@6T;
• On-chip 4/8/13/16/20/32/64K FLASH program memory with flexible ISP/IAP capability On-chip 1280 byte / 512-byte RAM Be capable of addressing up to 64K byte of external RAMBe capable of addressing up to 64K bytes external memory Robotics BD;
• Dual Data Pointer (DPTR) to speed up data movement; Three 16-bit timer/counter, Timer 2 is an up/down counter with programmable clock output on P1.0; 8 vector-address, 4 level priority interrupt capability;
• One enhanced UART with hardware address-recognition, frame-error detection function, and with self-baud rate generator.
• One 15 bits Watch-Dog-Timer with 8-bit pre-scaler (one-time-enabled) integrate MAX810 specialized reset circuit;
• Three power management modes: idle mode and power-down mode Low EMI: inhibit ALE emission;
• Power down mode can be woken-up by INT0/P3.2 pin, INT1/P3.3 pin, T0/P3.4, T1/P3.5, RXD/P3.0 pin, INT2/P4.3, INT3/P4.2;
• 39 programmable I/O ports are available Four 8-bit bi-directional ports;
• extra four-bit additional P4 are available for PLCC-44 and LQFP-44
• Operating temperature: -40 ~ +85o C (industrial) / 0~75o C (commercial)
• Package Includes:
  • 8X8 dot matrix screen, Water lamp, two relay control, Infrared transmitter and receiver,
  • Multiple sensor pin, 1 x 8051 MCU Learning Development Board Kit;
  • 1 x Laser engraving wooden development box;
  • 1 x STC89C52RC-51 MCU chip;
  • 1 x 8×8 LED dot matrix screen;
  • 1 x LCD1602 LCD display;
  • 1 x 5-wire 4-phase stepper motor;
  • 1 x 5V DC motor;
  • 1 x Infrared remote control;
  • 1 x Temperature sensor;
  • 1 x Close sensitive resistance sensor;
  • 1 x Thermistor sensor;
  • 1 x CR1220 clock circuit battery;
  • 1 x USB download data cable;
  • 10 x 20cm high-quality Dupont wire;
  • 1 x 11mm copper pillar pad

Accessories:

• Power Cord: 01 Set
• Connecting Wire & Cable
• Complete 5 days Training Included
• User Manual or User Guide

Protection:

Under voltage, Supply over voltage, Thermal, Short Circuit etc.

Warranty: One (1) year with services