Basic Sensor Equipment lab Trainer

Brand: PValley

Model: SC-296T3

Country of origin: China

Country of Assembly/Manufacturer: Bangladesh

 

 

General Specification:

Body Material

Printed Front Side Sheet

Sheet Type: Digital
Country of origin: China
Feature:

• Sheet number 26
• Storage Printed temperature 300°c
• Color White/Silver

Hard Round support board or Plastic Sheet

Sheet Type: Digital
Country of origin: Pakistan
Feature:

• Sheet thickness 10mm
• Two-Part Combination (Transparent/white)
• UV Printout

Best structure

Brand: Altech
Country of origin: Bangladesh
Feature:

• Sheet thickness 5mm
• Sheet (Silver/white)
• Square Shape

Use Connector

Brand: ZHT
Country of origin: China
Feature:

• Banana Female Connector Diameter 2mm
• Banana Male Connector Diameter 2mm

Working Platform area:

• Working area: 18 * 12 inch
• Total Module unit 16

Technical Specification:

Basic Sensor equipment lab trainer with all module and simulation support

Sensor Main Unit

1. Power Supply Unit

Fixed DC power supply:

• Output voltage: +5V, -5V, +12V, -12V
• Output current: +5V/3A, -5V/0.3A, +12V/1.5A, -12V/0.3A
• With output overload protection

2. A/D Converter: 1×12-bit ADC

• Input voltage range: 0 ~ +5V
• Time pulse frequency: 3.58 MHz
• Control signals: Status, pole, over range indication

3. Interface Port: USB interface, Type B
4. D/A Converter: 1x 12-bit DAC
5. Preset Level: 4-digit thumbwheel switch, Max. value: 4095
6. Status Display & DCV

Input voltage measurement:

• Range: 2000mV, 20V
• Accuracy: ±0.05% of reading + 4 counts
• Input impedance: 10MΩ
• Display: 4 ½ digits

7. Mode Selector: Manual / single-chip
8. Buzzer: Max. Input signal voltage : +12V
9. Micro controller Signals 5 Control line outputs
10. Model Holder: X4
11. Potentiometer: 100KΩ B-type
12. Comparator: V-, V+ input, V0 output
13. Differential Amplifier: V-, V+ input, V0 output
14. Instrumentation Amplifier: V-, V+ input, V0 output, adjustable gain

System Requirement

• PC: 1GHz or faster 32-bit (x86) or 64-bit (x64) processor, 1GB RAM, 1GB more free disk space
• OS: Windows XP/Vista/7/8/10

List of Module

Module-1:

• Photo transistor
• Photo interrupter
• Digital magnetic detector
• Analog magnetic detector

Module-2:

• Pyroelectric detector
• Reed switch
• Thermistor
• Mercury switch

Module-3:

• Limit switch
• Vibration switch
• Condenser microphone
• Dynamic microphone

Module-4:

• Gas / smoke sensor
• Ethanol sensor

Module-5:

• IC (AD590) temperature sensor
• Humidity sensor
  • Humidity transducer rated voltage: 1 Vp-p AC
  • Frequency range: 100 Hz ~ 10 KHz
  • Temperature range: 0°C ~ 60°C
  • Humidity range: 20% RH ~ 90% RH
  • Impedance: 13 KΩ (70%RH at 25°C)

Module-6:

• Infrared TX / RX sensor
• Ultrasonic TX / RX sensor. Nominal frequency: 40KHz

Module-7:

• Pressure sensor: 0~7 psi to 0~30 psi pressure ranges
• Strain gauge: Max. Payload :< 5kg, Terminal resistance: 350 ± 50Ω

Module-8:

• Hall current sensor: Nominal current: ±3A, Current range: ±9A, Output voltage: ±4V, RL = 10K Ohms
• Proximity sensor: Operation voltages: 10V ~ 30V DC, Short circuit protection

Module-9:

• CDS sensor
• Photovoltaic sensor: Photovoltaic transducer open voltage 2V, Photovoltaic transducer close current 0.06 µA/lx

Module-10:

• V/F converter: Input voltage: +10mV ~+10V, Output frequency: 5Hz ~ 5KHz, 10Hz ~10KHz

Module-11:

• F/V converter: Input frequency: 0 ~ 4.3KHz ( ±0.2Vp ~ ±5Vp), Output voltage: 0 ~ 4.3V DC

Module-12:

• RTD (PT-100): 0°C: 100Ω , 100°C: 139.16Ω, Rating: 250°C

Module-13:

• Level (Water): Simulation of the reservoir control status (motor included)

Module-14:

• Fiber optic emitter: Forward current, DC (lF): 50mA, Peak wave length: 950nm, Output power: 50 µw
• Fiber optic phototransistor: λpeak: 850nm, Collect current (lC): 50mA, Power dissipation: 100mw

Module-15:

• LVDT: Range: ±5mm, Scale: 0.01mm, Optimum frequency: 50Hz ~ 1.1KHz, (Nominal : 350Hz)

Module-16:

• Rotation angle sensor: 10 turns (3600°) precision potentiometer, Linearity: ± 0.25%

List of Experiments:

1. D/A and A/D Converters
2. Characteristics of Sensors
3. Gas Sensors
4. AD590 Temperature Transducer
5. Hall Current Sensor
6. PT100 Temperature Sensor
7. Humidity Sensor
8. Strain Gauge
9. Linear Variable Difference Transformer (LVDT)
10. Photovoltaic Cell
11. Proximity Switch
12. Infrared Transducer
13. Ultrasonic Transducer
14. Pressure Sensor

Protection System

• Over-Voltage Protection
• Over-Current Protection
• Short-Circuit Protection
• Thermal Protection

Standard Accessories

• Power Cord
• Male to Male Banana Connector
• Experiment Manual and Instructor’s Manual
• Connection Leads and Plugs
• 5 Days In-House Training

Warranty: One (1) Year with Services