Linear Circuit Lab (1) – Electric Circuits Lab

Brand: PValley

Model: EC-321L1

Country of Origin: Taiwan

Manufacturer: Bangladesh

 

 

Features:

• Ideal for electric circuit experiments and design exercises
• Integrated trainer with complete curriculum
• Complete with power supplies and test systems for easy and
• efficient experimentation
• Universal breadboard (1680 tie points) for circuit design and prototyping
• All modules equipped with an 8-bit DIP switch for circuits fault simulations

General Specification:

Body Material:

Printed Front Side Sheet

Sheet Type: Digital
Country of origin: China
Feature:

• Sheet number 26
• Storage Printed temperature 300°c
• Color White/Silver

Hard Round support board or Plastic Sheet

Sheet Type: Digital
Country of origin: Pakistan
Feature:

• Sheet thickness 10mm
• Two-Part Combination(Transparent/white)
• UV Printout

Safety Breaker
Brand: Hyundai
Country of origin: South Korea
Feature:

• Human Body Sense safety
• Current error detection range is 20mA
• Soft tripping
• Low noise cut off

Panel Box

Brand: Madhav Enterprise
Country of origin: Indian

Features:

• Shape: Rectangular
• Surface Finish: Smooth
• High-quality raw material

Best structure

Brand: Altech
Country of origin: Bangladesh
Feature:

• Sheet thickness 5mm
• Sheet (Silver/white)
• Square Shape

Power Monitoring

Brand: UNI-T
Country of origin: China
Feature:

• Self-operating voltage 12V
• Self-Consumption Current 20mA
• Power Nature

Use Connector

Brand: ZHT
Country of origin: China
Feature:

• Banana Female Connector Diameter 4.5mm
• Banana Male Connector Diameter 4.5mm

Working area:

• Working area: 40 * 25 inch

Technical Specifications:

• Main Unit
• DC Power Supply
  • (1) Fixed DC power supply

1. Voltage range: ±5V, ±12V
2. With output overload protection

• (2) Dual DC power supply

1. Voltage range: ±3V ~ ±18V, continuously adjustable
2. With output overload protection

• AC Power Supply

(1) Voltage range : 9V ~ 0~ 9V

(2) With output overload protection

• Function Generator

(1) Output waveform: sine, square and triangle

(2) Output frequency: 10Hz ~ 100KHz, 4 settings, continuously adjustable

(3) Accuracy: ±5% of full-scale value

(4) Output impedance: 50 ohms

(5) Output voltage: ≥ 18Vpp (open loop), ≥ 9Vpp (with 50 ohms load)

• 3 1/2-digit Digital Voltmeter/Ammeter

(1) DC voltage range: 2V, 200V

(2) DC voltage accuracy: ±0.3% of reading + 1-digit

(3) DC current range: 200µA, 2000mA

(4) DC current accuracy: ±0.5% of reading + 1-digit

• Analog Meters

(1) AC current: 0 ~ 100mA ~ 1A

(2) AC voltage: 0 ~ 15V

(3) DC current: 0 ~ 100mA ~ 1A

(4) DC voltage: 0 ~ 20V

• Speaker: 8 ohms, 0.25W speaker with driver circuit
• Variable Resistors

(1) 1K ohms, 0.25W variable resistor with 3 terminals (A, B, C)

(2) 10K ohms, 0.25W variable resistor with 3 terminals (A, B,C)

(3) 100K ohms, 0.25W variable resistor with 3 terminals (A, B,C)

(4) 1M ohms, 0.25W variable resistor with 3 terminals (A, B, C)

• Breadboard:1680 tie-point breadboard on top panel can be easily put into and taken off.

Experiment Modules

1. 11 modules, each module is equipped with an 8-bit DIP switch for circuits fault simulations. Students can practice trouble shooting by setting the DIP switch to different positions.
2. Detailed solution for fault simulation is included in the instructor’s manual.
3. All sockets on the modules accept 2mm plugs.
4. Comprehensive experiment manual and instructor’s manual
5. Module dimension : (255 x 165 x 30)mm.

List of Modules

1. Basic Electricity Experiments Module
2. Magnetism Element Introduction Module
3. Magnetic Field Module
4. Ampere’s Rule Module
5. Fleming’s Rule Module
6. Electromagnetic Induction
7. Electronic Circuit Fundamental Experiments Module
8. Basic Electronic Circuit Experiments (1)
9. Basic Electronic Circuit Experiments (2)
10. Special Electronic Components Experiments Module
11. Oscillator Experiments and Applications Module

List of Experiments

• Experiments for Basic Electricity

(1) DC voltage measurement
(2) Using an ohmmeter
(3) Resistor characteristics
(4) DC current measurement
(5) Ohm’s law
(6) Power in DC circuit
(7) Series-parallel network and Kirchoff’s law
(8) Superposition, Thevenin’s and Norton’s theorems
(9) Maximum power transfer theorem
(10) DC RC circuit and transient phenomena
(11) AC voltage measurement
(12) AC current measurement
(13) AC RC circuit
(14) AC RL circuit
(15) AC RLC circuit
(16) Power in AC circuit
(17) Transformer characteristics
(18) Series-resonant circuit
(19) Parallel-resonant circuit
(20) LC filter

2. Experiments for Magnetism

(1) Magnetic devices
(2) Magnetic field
(3) Drawing magnetic curves
(4) Magnetic field strength
(5) Lenz’s and Faraday’s laws
(6) Ampere’s rule
(7) Fleming’s rule
(8) Self Induction
(9) Mutual Induction
(10) Magnetic flux detection

3. Experiments for Basic Electronic Circuits

(1) Diode characteristics
(2) Rectifier circuit
(3) Filter circuit
(4) Zener diode characteristics
(5) LED characteristics
(6) Transistor characteristics
(7) Multimeter functions
(8) FET characteristics
(9) SCR characteristics
(10) UJT characteristics

4. Experiments for Simple Electronic Circuits

(1) Simple amplifier
(2) Complementary amplifier
(3) Voltage regulator
(4) Push-pull amplifier
(5) Wheatstone bridge
(6) Dimmer circuit
(7) Multistage cascading amplifier
(8) Relay characteristics
(9) Touch-controlled switch

5. Experiments for Industrial Control Applications

(1) CDS characteristics
(2) Light-controlled circuit
(3) Thermistor characteristics
(4) Temperature-controlled circuit
(5) Sound controlled circuit

6. Experiments for Oscillator Characteristics and Applications

(1) Blocking oscillator
(2) Electronic birdcall circuit
(3) Astable multivibrator
(4) LED flasher circuit
(5) LC resonant circuit

Software:

1. Built-in circuit simulation of experiment modules.
   2. Fault simulation is allowed.
   3. Users can flexibly compare the simulation analysis result with hardware signal output.
   4. Support virtual instrument.

Protection System

• Over-Current Protection (OCP)
• Short-Circuit Protection
• Over-Voltage Protection (OVP)
• Under-Voltage Protection (UVP)
• Earth Leakage / ELCB (RCCB)
• Thermal / Over-Temperature
• Fuse Protection
• Emergency Stop (E-STOP)

Standard Accessories

• Power Cord
• External Switch Module
• Male to Male Banana Connector
• Experiment Manual and Instructor’s Manual
• Connection Leads and Plugs
• 5 Days In-House Training

Warranty Period: One (1) Year