Digital Trainer Board

Brand: PValley

Model: M21-7000

Country of Origin: China

Assemble/Manufacturer: Bangladesh

Technical Features:

Interconnected with 2820 tie points of nickel-plated contact, fitted for all DIP sizes and all components with lead and solid wire AWG #22-30 (0.3-0.8 mm). It can be changed and replaced for different purposes and can be connected with a demonstration panel. Therefore, it is very convenient for both teachers and students.

Technical Specification:

• DC POWER SUPPLY
  • Fixed DC output +5V, 1A
  • Fixed DC output -5V, 1 A.
  • Variable DC output 0V to +15V, 1 A.
  • Variable DC output 0V to 15V, 1 A.

• POTENTION METERS
  • Variable resistor VR1 1kΩ
  • Variable resistor VR2 100kΩ
• FUNCTION GENERATOR
  • Frequency range: 1 Hz–10 Hz
  • 10 Hz–100 Hz
  • 100 Hz–1 kHz
  • 1 kHz–10 kHz
  • 10 kHz–100 kHz
• Amplitude
  • Sine wave output: 0-10 Vpp variable
  • Triangle wave output: 0-10 Vpp variable
  • Square wave output: 0-10 Vpp variable
  • TTL mode output -4 Vpp
• TWO DIGITS OF 7 SEGMENT LED DISPLAY
• TWO-PULSE SWITCH
  • TWO-PULSE SWITCH 2pcs pushbuttons contain switches debounce for
    eliminating the bounce caused by switching from open to close or from close to open position.
• SIXTEEN DATA SWITCHES
  • SIXTEEN DATA SWITCHES 16 pcs toggle switches and corresponding output points. When the switch is set at the down position, the output is low level; contrarily, it is to be HI level while setting at up position.

• SPEAKER
  • SPEAKER: 2-1/2 inch diameter, 8 ohm/0.5W to be used for load.
• FOUR CHANNEL ADAPTER
  • FOUR-CHANNEL ADAPTOR Both of the two banana sockets’ and two BNC jacks’ point tips are changeable. It is suitable for the M21-7000 to be connected with peripherals.
• SIXTEEN-BIT LED DISPLAY
  • SIXTEEN BITS LED DISPLAY: 16 red LEDs with separate input terminals. The LED will be lighted up when input is at HI level, and it will be turned off when it is at no input or at LO level.

• UNIVERSAL CONNECTOR FIXED HOLDER
  • It reserves universal connector fixed holder on the panel in order to be connected with various universal connectors, which are available
    • Straight header 60 pin
    • Card edge connector 2.54 mm 62 pin
    • D-sub 25-pin connector, male & female
    • Card edge connector 3.96 mm 56 pin
    • Dip sockets connector 28 pin & 40 pin
  • OTHER STANDARD ACCESSORIES
    • Power cord
    • Pin: 10 pcs
    • User manual
  • DIMENSIONS & WEIGHT 258 x 95 x 334mm (WxHxD), Approx 4.5kg