Optical Fiber Splicer Machine

Brand: K2

Model: K2 FiberFox 3S Mini

Country of Origin: South Korea

Assemble/ Manufacturer: South Korea

 

General Features:

• Fiber type: single
• Applicable fiber: SM, MM, DS, NZDS
• Average loss: 0.02 db(SM), 0.01 db(MM), 0.04 db (DS& NZDS)
• Heating Time: 15sec with 60mm sleeve
• Universal Holder
• LED Injection System
• The Fast-Splicing Time

Features:

1.Color LCD monitor & 256 magnification

2.Compact & Light weight

3.Reversible monitor with control panel on each side

4.Max. wind velocity of 15m/s.

5.8 Sec. splice time, 40 Sec. tube-heat time

6.Simultaneous X and Y views

7.Large capacity internal battery

8.SYSTEM TEST ensures the best working condition

9.User programmable

10.Auto check fiber end face

11.Auto calibrate parameters

12.Auto calibrate parameters

13.Multiple language options

Technical Specification:

• Applicable Fibers: Single-mode (G.652 & G.657),
• Multimode (G.651), DS (G.653), NZDS (G.655)
• Fiber Count: Single, 2, 4, 5, 6, 8, 10, 12
• Cladding Diameter: 125 μm
• Coating Diameter: Ribbon: 0.25 mm to 0.4 mm,
• Single: 250 μm and 900 μm
• Fiber Cleave Length: 10 mm
• Typical Average Splice Loss: 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS; measured by cut-back method relevant to ITU-T standards
• Splicing Time: Typical 15 seconds with standard single-mode fiber
• Arc Calibration Method: Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available
• Splicing Modes: 100 preset and user programmable modes
• Splice Loss Estimate: Based upon dual camera cladding alignment data
• Storage of Splice Result: Last 2000 splice results stored in the internal memory
• Fiber Display: X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation
• Magnification: 35X to 90X
• Viewing Method: Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating or 4.3 colour LCD or LCD Monitor with Touch Screen (Tempered Glass), Anti-Reflective Screen.
• Operating Condition: 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively
• Mechanical Proof Test: 1.96 to 2.25 N
• Tube Heater: Built-in tube heater with 30 heating modes; auto-start function
• Tube Heating Time: Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves
• Protection Sleeve Length: 60 mm, 40 mm, Micro
• Splice/Heat Cycles with Battery: Typical 110 cycles with power save functions activated
• Electrode Life: 1,500 Arc Discharges
• Power Supply: Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery
• Terminals: USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03
• Wind Protection: Maximum wind velocity of 15m/s (34 mph)

Standard Accessories

• Power Cord
• Instructor’s Manual
• 5 Days In-House Training

Warranty: One (1) Year with Services